National Chung Cheng University Institutional Repository:
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 889/889 (100%)
Visitors : 14653028      Online Users : 13
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version

    Collection Statistics

    Item counts issued in 3 years: 0(0.00%)
    Items With Fulltext: 147(100.00%)

    Download counts of the item
    Download times greater than 0: 147(100.00%)
    Download times greater than 100: 147(100.00%)
    Total Bitstream Download Counts: 92552(100.00%)

    Last Update: 2022-09-25 07:04

    Top Upload


    Top Download


    RSS Feed RSS Feed
    Jump to a point in the index:
    Or type in a year:
    Ordering With Most Recent First Show Oldest First

    Showing items 51-75 of 147. (6 Page(s) Totally)
    << < 1 2 3 4 5 6 > >>
    View [10|25|50] records per page

    2018 觸媒層製程對高溫質子交換膜燃料電池性能影響之研究;Study on the Effect of Manufacturing Processes of the Catalyst Layer on the Performance of High Temperature Proton Exchange Membrane Fuel Cells 謝長佑; HSIEH, CHANG-YU
    2018 以摩擦攪拌積層製造鋁合金積層材之性質分析; 黃泳鋒; Huang, Yong-Fong
    2018 結合電潤濕和潤濕梯度之微接觸印刷的可行性評估; 曾國豪; Zeng, Guo-Hao
    2018 適用於捲對捲印刷之位置影像感測系統研發;Development of an image sensing system suitable for R2R printing position 鄭陞豪; CHENG, SHENG-HAO
    2018 正交配置降階模型應用於計時電流法 之參數鑑別; 黃士庭; Huang, Shi-Ting
    2018 初探刮刀塗佈之bow-wave分析; 董庭維; TUNG, TING-WEI
    2018 應用於矯正和數位牙科之自動化快速排牙;Rapid Automatic Tooth Arrangement Applied to Orthodontic and Digital Dentistry 蔡博丞; TSAI, BO-CHENG
    2018 由不同動物牙齒之牙釉層的微觀結構來探索前瞻材料的準則;Tooth Enamel Prism Microstructure of Different Animal Explore Unprecedented Engineering Material Guidelines 曹鈞凱; CAO, JYUN-KAI
    2018 進給系統健康診斷技術之研發;Developments of Fault Detection Techniques for Ball Screw Feed Drive Systems 江玟菱; CHIANG, WEN-LIN
    2018 探討切屑熱量對滾珠螺桿螺帽間熱傳之影響;Study on the Effect of Chip Heat on the Heat Transfer between the Shaft and the Nut of a Ball Screw Drive System. 李迦暐; LI, CHIA-WEI
    2018 中紅外光矽基鍺錫電致吸收光調變器;Mid-infrared GeSn Electro-absorption Optical Modulators on Silicon 林君翰; LIN, JUN-HAN
    2018 預測冷抽碳鋼棒材中心缺陷與驗證;Numerical Prediction of Central Burst Defect in Cold Draw of Carbon Steel with Experimental Validation 黃彥儒; HUANG, YEN-JU
    2018 應用PSO最佳化演算法鑑別機械手臂之轉動慣量與避障路徑規劃; 鄭志善; Zheng, Zhi-Shan
    2018 軋延參數對於鋼帶精軋尾板側偏與鋼帶變形分析;Rolling Parameters Analyze Strip Tail Deviation and Deformation in Finish Mill 康書維; Kang, Shu-Wei
    2018 雙光柵生物感測器結合奈米金效應之研究; 吳尚勳
    2018 滾珠螺桿進給系統之發熱量模擬研究;Simulation study on the heat generation of a ball screw drive system 張庭綱; CHANG, TING-KANG
    2018 C型工具機溫升熱變形特性研究;A study on the thermal deformation and temperature rise characteristics of C-type machine tool center 朱冠宇; JU, GUAN-YU
    2018 結合三明治法與光柵耦合生物感測器應用於綠膿桿菌藥物通道蛋白檢測; 曾柏勳; ZENG, BO-XUN
    2018 共振腔增強之矽基鍺錫光偵測器與發光二極體;Resonant-cavity-enhanced GeSn Photodetectors and Light-emitters on Silicon 黃柏鈞; HUANG, BO-JUN
    2018 端銑刀磨耗線上量測;End Mill Tool Wear On-Line Measurement 陳正益; CHEN, CHENG-YI
    2018 結構光結合機械手臂重建工件三維模型之研究;Three Dimensional Model Reconstruction Using Structured-light Scanner And Robotic Arm 林亮均; LIN, LIANG-CHUN
    2017 離子高分子金屬複合材料蠕動致動器設計製造及測試; 許浩偉; HSU, HAO-WEI
    2017 石墨氈電極壓縮率對全釩氧化還原液流電池性能影響之研究;Study on the Effect of Compression Ratio of Graphite felts on the Performance of All-Vanadium Redox Flow Batteries 蔡柏宏; TSAI, PO HONG
    2017 雙端固定式壓電石英音叉加速規之研製;Fabrication of Double-End Tuning Fork piezoelectric Quartz Accelerometers 翁茂正; WENG, MAO-CHENG
    2017 繞射光柵線性軸多自由度誤差量測系統之開發;Grating-Based Interferometry For Multi-Degree-Of-Freedom Error Measurement System 陳家陞; Chen, Chia-Sheng

    Showing items 51-75 of 147. (6 Page(s) Totally)
    << < 1 2 3 4 5 6 > >>
    View [10|25|50] records per page

    版權聲明 © 國立中正大學圖書館網頁內容著作權屬國立中正大學圖書館


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback